{"id":18306,"date":"2024-03-21T04:17:57","date_gmt":"2024-03-21T04:17:57","guid":{"rendered":"https:\/\/cn.ddpai.com\/?page_id=18306"},"modified":"2026-04-13T15:25:11","modified_gmt":"2026-04-13T15:25:11","slug":"ranger","status":"publish","type":"page","link":"https:\/\/cn.ddpai.com\/en\/manuals\/ranger\/","title":{"rendered":"Ranger Riding Camera User Guide"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

DDPAI<\/a><\/span><\/span><\/p>\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t

DDPAI RANGER
User Manual<\/h1>\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t
Table of Contents <\/div><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Product Introduction<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t

Appearance <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t

Button Function <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"ranger\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n
Button<\/strong><\/td>\nFunction<\/strong><\/td>\n<\/tr>\n
Power Button<\/td>\nHold 1s to power on the device
Press to return to the home screen
Hold 2s to power off the device
Hold 10s to force shutdown<\/td>\n<\/tr>\n
Left Button<\/td>\nPress to take a photo \/ short video
Hold 2s to start\/end manual recording<\/td>\n<\/tr>\n
Right Button<\/td>\nPress to enter the data interface\/switch the data
Hold 2s to start the riding mode
Hold 2s to pause the riding mode
After pausing, press to resume the riding mode
After pausing, hold 2s to end the riding mode<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t

Touchscreen Description <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"ranger\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n
Operation<\/strong><\/td>\nFunction<\/strong><\/td>\n<\/tr>\n
Swipe Down<\/td>\nAccess the Settings interface<\/td>\n<\/tr>\n
Swipe Right<\/td>\nSwipe right on the home screen: Access the Album
Swipe right on the other interfaces: Return to the previous interface<\/td>\n<\/tr>\n
Swipe Left<\/td>\nAccess the Data interface<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t

Indicator Guide <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n
Indicator<\/strong><\/td>\nSystem Status<\/strong><\/td>\n<\/tr>\n
Breathing Green<\/td>\nPower On (Not Recording)<\/td>\n<\/tr>\n
Steady Green<\/td>\nRecording<\/td>\n<\/tr>\n
Flashes Green<\/td>\nUpgrading<\/td>\n<\/tr>\n
Flashes Yellow<\/td>\nAbnormal Storage \/ High Temperature<\/td>\n<\/tr>\n
Flashes Purple<\/td>\nTake Pictures \/ Short Videos<\/td>\n<\/tr>\n
Steady Purple<\/td>\nUSB Transfer Mode<\/td>\n<\/tr>\n
Steady Red<\/td>\nMoment of Power On<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t

Installation<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t

Installing the Riding Camera <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u25b6 Installing the Standard Bracket<\/strong><\/p>\n

Clip the camera mount adapter (1) into the quick release base, then insert the locking screw (2) and tighten it clockwise.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Installing\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u25b6 Installing the Riding Camera<\/strong><\/p>\n

Align the bottom of the device with the groove of the base, rotate it 90\u00b0 and click it into place.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\tRotate 90\u00b0 to remove the device.\n\n<\/span>\n\t\t\t\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Installing\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u25b6 Installing the Camera Bracket (Optional)<\/strong><\/p>\n

1. Clamp the clamping claw part at the bottom of the bracket onto the handlebar, and tighten the screw clockwise to fix the base.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Installing\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

2. Unscrew the side knob of the bracket counterclockwise to adjust the angle of the bracket.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Installing\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

3. After adjusting the angle, tighten the knob clockwise to fix it.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t

\n\t\t\t\t\n\t\t\t\t\t

Charging the Riding Camera <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u25b6 Type-C Charging<\/strong><\/p>\n

Open the charging cover on the back of the device and use the included power cable to connect to the Type-C interface for charging.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Type-C\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u25b6 ACC Charging Base (Optional)<\/strong><\/p>\n

Charging Accessories Overview<\/p>\n

\u2460 Charging Base<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Charging\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2461 USB Power Cable<\/p>\n

(Note: Please ensure that the input value of the USB port can reach at least 5V\u23932A)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"USB\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2462 Three-end Wire<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Three-end\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2463 Red Wire (ACC Signal Line)
\u2464 Yellow Wire (VCC Power Line\/Positive Pole)
\u2465 Black Wire (GND Ground Wire\/Negative Pole or Ground)
\u2466 Fuse Box<\/p>\n

Installation Guide<\/b><\/p>\n

1. Choose the installation method suitable for your motorcycle:<\/p>\n

Connect three-end wire \u2462 or USB power cable \u2461 to the charging base \u2460.<\/p>\n

1) Three-end wire \u2462 installation:<\/p>\n

a. Connect ACC signal wire \u2463 to the motorcycle ACC power supply, connect VCC power wire \u2464 to VCC power supply of the motorcycle, connect GND ground wire \u2465 to the motorcycle ground wire. In this way, the camera can be turned on automatically with the motorcycle key.<\/p>\n

b. If there is no motorcycle ACC, you can connect the ACC signal line \u2463 to the motorcycle ignition interface, such as headlights, etc.<\/p>\n

c. If there is no motorcycle ACC, you can connect the ACC signal wire \u2463 and the VCC power wire \u2464 together and connect them both to the positive pole of the motorcycle power supply. The GND ground wire \u2465 is connected to the motorcycle’s ground wire. After completing the wiring, the camera will automatically turn on. After the motorcycle is turned off, please remember to take the camera away to avoid consuming the motorcycle battery and cover the power base with a waterproof and dustproof cover.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\tIt is recommended to connect the camera to the motorcycle ACC power supply.<\/span>\n\t\t\t\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

2\uff09USB power cable \u2461 installation:
Plug the USB connector of the USB power cable into the USB port of the motorcycle.<\/p>\n

2. Use cable ties to secure and store excess wire length. When fixing and removing wires, please keep them away from anklets\/movable mechanisms\/high-temperature devices, etc.<\/p>\n

Before installing the camera, if there is water or dirt on the ACC charging base, please wipe it dry before installing the device. When not in use, please cover it tightly with a waterproof and dustproof cover to prevent foreign matter from remaining.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t

App Connection<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t

Downloading the DDPAI App <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\tSince the app is constantly updated and upgraded, the actual operation may be slightly different from the following description. Please refer to the actual operation guidance in the app.<\/span>\n\t\t\t\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Please scan the QR code below or search for “DDPAI” in Google\u00a0Play Store (Android) or App Store (iOS) to download the DDPAI App.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"ddpai\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t

First-time Connection <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\tBefore connecting to the app for the first time, you need to press and hold the power button of the camera to turn it on. After entering the boot screen, please follow the instructions on the page to activate Ranger.<\/span>\n\t\t\t\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2460\u00a0Turn on the device and follow the instructions on the startup page, as shown in the figure below.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"startup\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2461 Turn on Bluetooth of your phone.
\u2462 Launch the DDPAI App, enter the “Device” interface, and tap “+ Add a device”.
\u2463 Select the current device model (DDP01XXXX) in the Bluetooth list.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Launch\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2464 Tap the “Authorize” button on the camera screen to activate Ranger.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Authorize-\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\tIf you fail to search the Bluetooth device, you can tap \"Rescan\" to search for the Bluetooth device again.<\/span>\n\t\t\t\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Rescan\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\tIf it is not the first connection, after the device is turned on, open the app, enter the \"Device\" interface, and tap the \"Not Connected\" button to connect directly back to the device via Bluetooth.<\/span>\n\t\t\t\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Not\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\t\u25cf The device can only connect to one phone at a time via Bluetooth.
\u25cf When a device has been connected to a mobile phone via Bluetooth, please turn off the mobile phone's Bluetooth\/delete the device on the app\/reset the device to allow another mobile phone to connect to the device via Bluetooth.<\/span>\n\t\t\t\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t

Wi-Fi Connection <\/h3><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/path><\/svg><\/span>\n\t\t\t<\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\tIf you want to check the device album, device settings, real-time footage or download the video, please connect the device via Wi-Fi first.<\/span>\n\t\t\t\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

For iPhones:<\/strong><\/p>\n

\u2460 Tap \u201cConnect the device to view\u201d > \u201cGo to connection\u201d.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Tap\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2461 Tap \u201cWLAN\u201d and select the current device \u201cDDPAI_RANGER_XXXX\u201d.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"ap\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2462 Paste the password directly into the edit box and tap \u201cJoin\u201d.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Paste\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\tNote<\/span>\n\t\t\t\n\t\t\t\t\t\tThe password has been automatically copied in the background. You only need to paste it directly into the edit box without entering it manually.<\/span>\n\t\t\t\n\t\t\t\t\t\t